Fuji Xerox DOCUCENTRE-II C3000, User Manual

Page: 246 / 603

10 Paper and Other Media
244
Pa
pe
r an
d
Oth
er M
edi
a
10
• When loading envelopes, make sure the flaps are closed and that the envelopes are
oriented on the tray so that the flaps will enter the machine first. However, when loading C5-
size envelopes, set the long edge feed so that the edge with the flaps is facing towards you.
• When making copies or prints
on thick-stock paper and the
paper will not feed into the
machine, apply a curl to the
paper as shown in the figure
on the right. Note, however,
that excessively bending or
folding the paper may cause
paper jams.
• Depending on the type of the
paper, paper may not be fed to
the machine or image quality
may deteriorate.
3
Adjust the paper guides to just
touch the edges of the paper
loaded.
4
Select a copy or print job.
Tandem Tray Module (TTM)
The Tandem Tray Module allows you to load larger amounts of paper. It consists of two
trays.
Note • You cannot load custom size paper into the Tandem Tray Module.
1
Pull out Tray 2 or Tray 3 of the TTM.
The elevator in the tray lowers.
2
Place the paper stock tightly against
the left rear corner of the tray.
Note • Do not load paper above the
maximum fill line.
Note • Always load paper into the tray
in the orientation shown in the
diagram.
3
Close the tray.
The elevator rises and positions the paper for use.