Output Format
93
Co
py
3
Serial Number
Displays the [Watermark - Serial Number] screen.
Refer to "[Watermark - Serial Number] Screen" (P.94).
Text Effect
Displays the [Watermark - Text Effect] screen.
Refer to "[Watermark - Text Effect] Screen" (P.94).
Note
• This feature does not appear for some models. An optional package is necessary. For more
information, contact our Customer Support Center.
[Watermark - Control Number] Screen
You can set a control number within the range from 1 to 9999.
1
Select [On].
2
Set the start number using [
] and
[
] or with the numeric keypad.
Off
No control number is printed.
On
A control number is printed. Enter the starting number of the control number.
[Watermark - Text] Screen
Select the text to print on the copy.
1
Select [On].
2
Select any text.
Off
No text is printed.
On
Text is printed. You can select the text for stamp. You can specify text from 3 preset
text or the text set in the System Administration mode.
For information on how to register text, refer to "6 System Settings" > "Common Settings" >
"Watermark" > "Custom Text 1 to 3" in the Administrator Guide.
[Watermark - User Account Number] Screen
When using User Administration or Auditron Administration, a user account number is
printed.
Note
• [User Account Number] is the No. (User Administration Number) registered by users in
Login Setup/Auditron Administration.
• This screen is displayed when the Auditron Administration feature is enabled. If the Login
Setup/Auditron Administration feature is used, [User Account Number] is displayed even
when no data is collected. In this case, even if [On] is selected for [User Account Number],
the No. registered by users (User Administration Number) is not printed.
