background image

6 Installation When Using Microsoft Network (SMB)

44

Ins

ta

lla
tion W

h

e

n

 Us

ing M

ic

ros
of
t Ne

two

rk

6

Preparations

Prepare the following items to use the machine when using a Microsoft Network (SMB).

z

Network environment where either TCP/IP or NetBEUI can be used.

z

The "CentreWare Utilities" or "Driver CD Kit" CD-ROM: included with this product.

Installation Procedure

Installation Overview

The machine can be connected to computers using Microsoft Networks (SMB).

Depending on the network environment, the machine may need to be configured with 
an IP address, subnet mask and gateway address. Confirm with the network 
administrator and set up the necessary items.

The following is the procedure to connect the machine to a Microsoft Network (SMB).

z

Configuration on the Machine

Enabling the SMB port on the machine and configuring TCP/IP.

z

Configuration on the Computer

Installing the print driver.

Configuration on Machine

The following describes the configuration procedure to connect the machine to 
Microsoft Networks (SMB). First enable the SMB port, then set the TCP/IP settings.

Note

The configuration can also be performed using CentreWare Internet Services or IP 
configuration tools included in the "CentreWare Utilities" or "Driver CD Kit" CD-ROM.

Refer to "Using CentreWare Internet Services" (P.55) for how to use CentreWare Internet Services.

1

Display the [System Administrator Menu] screen.

1) Press the <Log In/Out> button.

2) Enter the UserID with the numeric keypad or a keyboard displayed by pressing 

[Keyboard], and select [Confirm].

Note

The default User ID value is "11111". When using the Authentication feature, a password is 
required.The default password is "x-admin".

3) Select [System Settings].

2

Enable the SMB port.

1) Select [System Settings].

2) Select [Network Settings].

3) Select [Port Settings].

4) Select [SMB] and then select [Change Settings].

5) Select [Port Status] and select [Change Settings].

6) Select [Enabled] then select [Save].

7) Select [Close] repeatedly until the [Network Settings] screen is displayed.

Summary of Contents for DocuCentre 9000





































































































































Reviews: