Fuji Xerox DocuCentre 1055, User Manual, Page: 84 / 245

4 Fax
84
1.
Press the < > or < > button to display
[Mailbox] on the Fax screen.
2.
Select [Mailbox] using the <Select>
button.
3.
Select a mailbox from the list.
4.
Enter a password for the mailbox.
5.
Perform the necessary operations.
Print
Prints the documents in the selected mailbox.
Delete All
Deletes all of the documents in the selected mailbox.
Chain Dialing
This feature allows you to specify a destination combining multiple Speed Dial codes,
One Touch Dial buttons and dialing using the numeric keypad. For example, you can
register country codes and local area codes for each Speed Dial in advance and then
combine them to specify one destination.
NOTE: The maximum number of digits for the feature is 192. However, Speed Dial
codes, One Touch Dial codes and manually dialed numbers can only be entered up to
64 digits each, so input may be limited even when the number of digits is less than
192 digits.
1.
Press the < > or < > button to display
[Chain Dialing] on the Fax screen.
2.
Select [Chain Dialing] using the
<Select> button.
3.
Select [On] to enable the feature.
On-Hook
This feature allows you to send a document after checking to hear the other party
answers, using line monitor. The line monitor volume can be set by the System
Administrator. For more information, refer to
Line Monitor in the Setups chapter on
page 135.
NOTE: Load the document for manual transmission in the document feeder. Manual
transmission is disabled if there is no document loaded in the document feeder.
If there is no document in the document feeder, the machine can be used for manual
reception and polling reception.