Fuji Xerox DocuCentre 1055, User Manual

Page: 36 / 245

2 Product Overview
36
• Low Power Mode
• Sleep Mode
NOTE: If the active tray runs out of paper when printing and remains untouched, or
the tray is pulled out from the machine and remains out, the power saving feature
does not operate.
Low Power Mode
The machine automatically switches to the Low Power Mode after a specified period of
time from the last copy, fax, scan, or print operation. In this mode, the screen is turned
off and the Power Saver light is on. The Low Power Mode is canceled when the <Power
Saver> button on the control panel is pressed, or a fax or print job is received by the
machine. The time interval is customer changeable within the range of 1 to 60 minutes.
For more information, refer to
Power Saver in the Setups chapter on page 134.
Sleep Mode
The machine automatically switches to the Sleep Mode after the Low Power Mode
continues a specified period of time. The Sleep Mode has a reduced power
consumption compared to Low Power Mode. In this mode, the screen is turned off, and
the Power Saver light is on. The Sleep Mode is cancelled when the <Power Saver>
button is pressed, or a fax or print job is received by the machine. The time interval is
customer changeable within the range of 1 to 239 minutes.
For more information, refer to
Power Saver in the Setups chapter on page 134.
Changing the Default Time Settings
This section describes how to change the default time settings such as Auto Clear,
Power Saver, and Scanning Timer. For more information, refer to
Timer Settings in the
Setups chapter on page 133.
1.
Press the <Log In/Out> button on the
control panel.
<Power Saver> light/button
<Log In/Out> button