Fuji Xerox DocuCentre 1055, User Manual

Page: 154 / 245

9 Setups
154
Fax Send Settings
Use this feature to configure the default settings for sending faxes.
Send Header
Configure the default settings for the header information.
• Save Sender Name – Allows you to register up to two names as sender information.
Select [Sender Name 1] or [Sender Name 2] using the <Select> button, and then
press the <Enter> button. Select [Entry Mode] to switch the character type using the
<Select> button, and enter the name (up to 40 characters) using the alphanumeric
keypad. To complete specifying the name, press the <Enter> button.
• Send Header – Specify whether or not to print the sender name, and if the sender
name is printed, select [Inside Original] or [Outside Original] for the position of the
sender name to be printed.
If [Inside Original] was selected, the print position is within the area of the document,
so printing may be superimposed on the letters at the top of the document. If
[Outside Original] was selected, the print position is outside the area of the
document, so printing will never be superimposed on the letters of the document.
However, depending on the settings of the counterpart machine, the added
information may not fit within the page, and may be split for output.
• Select Sender Name – Specify which registered name in [Save Sender Name] is to
be printed: [Sender Name 1] or [Sender Name 2].
• Recipient Name – Specify whether or not to print the recipient name that registered
in Address Book.
Resolution
Specify the default resolution for sending faxes.
• Text – Select this option when sending a text document.
• Fine – Scans document using 8 × 7.7 lines/mm resolution. This option is
recommended for detailed line art or small letters.
• Superfine – Scans document using 16 × 15.4 lines/mm resolution. This option is
recommended for detailed line art or small letters. It requires more communication
time, but produces a higher image quality.
• Halftone – Specifies a resolution for a dark and light coloring such as picture.
• Super Halftone – Specifies a resolution for a dark and light coloring such as picture.
It requires more communication time, but produces a higher image quality.