Fuji Xerox DocuCentre 1055, User Manual

Page: 150 / 245

9 Setups
150
Print ID
Specify whether or not to print the user ID. When printing the user ID, specify the print
position.
Odd Page 2 Sided
Specify whether to print the first page on single-sided or double-sided paper when the
total number of pages is an odd number.
Paper Select Mode
Specifies how to select paper when printing PostScript data.
• Auto
Select this to print on the paper in the tray specified by the printer driver.
• Select from tray
Some applications create the PostScript program directly without using a printer
driver. In this case, paper tray may not be selected correctly. Select this mode to
print data correctly on the specified paper.
Allocate Memory
Use this feature to specify memory capacities required for printing and for receive
buffer for each interface.
NOTE: The maximum value that can be specified varies according to the amount of
free memory remaining.
1.
Select the required option by selecting
[ ] or [ ] using the <Select> button.
2.
Press the <Enter> button.
3.
Perform the necessary operations.
NOTE: Selecting [Decimal] enables the entry of decimals.
4.
Press the <Enter> button. The selected option is indicated by an asterisk (*).
PS
Specify the memory capacity used for PostScript within the range of 8.00 to 96.00 MB
in 0.25 MB increments.
NOTE: The activation status of the port may make it impossible to obtain the
maximum PostScript memory size (96 MB).
PCL Memory
Specify the memory capacity used for PCL form within the range of 0.25 to 24.00 MB
in 0.25 MB increments.