Fuji Xerox Color C60, User Manual

Page: 184 / 365

4 Scan
184
Sca
n
4
Address Book
When you select a recipient using the Address Book, the following restrictions should be
noted.
z Only the recipients set for mail service can be used.
z You cannot use address numbers input by the numeric keypad or group numbers to
specify the recipients registered in the Address book.
z When an address contains a domain that is not permitted for use, the address cannot be
used.
z When sending an encrypted e-mail, select an e-mail address associated with a certificate
that can be encrypted, from the Address Book. To use this feature, an e-mail address
associated with a certificate for S/MIME need to be registered in the Address Book in
advance.
For information on how to set the Address Book, refer to "5 Tools" > "Setup" > "Add Address Book Entry" in the Administrator
Guide.
z
To verify the validity of a certificate, prior settings are required.
For information on the settings, refer to "5 Tools" > "Connectivity & Network Setup" > "Security Settings" > "Certificate
Revocation Retrieval Settings" in the Administrator Guide.
Types of the Address Book
The machine provides two different ways of displaying the Address book: [Type 1] and
[Type 2]. The Address Book [Type1] or [Type2] will be displayed depending on the setting of
[Address Book Type] in the System Administration mode.
For information on how to set the Address book type, refer to "5 Tools" > "Address Book Settings" > "Address Book Type" in
the Administrator Guide.
[Type 1]
[Type 2]
Address Book (Specifying a Destination Using the Address Book [Type 1])
The following describes how to specify a destination using the Address Book [Type 1].