Fuji Xerox Color C60, User Manual

Page: 159 / 365

Job Assembly
159
Co
py
3
„
Change Quantity
Displays the [Change Quantity] screen on which you can change the number of copy sets
using the numeric keypad.
„
Change Settings
Displays the [Copy] screen on which you can change the settings for the next document.
After changing the settings, press the <Start> button on the control panel to start scanning
of the document. To return to the previous screen, press the < # > button.
„
Delete
Clears the document data stored by the Build Job feature, and cancels the job.
Note • You can also press the <C (Clear)> or <Clear All> button on the control panel to perform the same
operation.
• While the machine is scanning the loaded document, [Delete] is displayed. Select [Delete] to pause
scanning. Select [Start] on the touch screen, or press the <Start> button on the control panel to
resume scanning.
„
Last Original
Select this button to end scanning of documents. The build job starts.
„
Next Original
Select this button when you have another document. This button is always selected when
you use the Build Job feature.
„
Start
After loading the next document, select this button to scan the next document.
Note • You can also press the <Start> button on the control panel to perform the same operation.
„
Sample Job
When making multiple sets of copies, you can print a sample set to check the finished output
and then print the remaining copy sets. You can select to continue or cancel the job after
the confirmation.
When using a stored program for Build Job
While the machine makes copies using the Build Job feature, you can use a stored program.
1) Select [Change Settings].
2) Select the [Job Assembly] tab.
3) Select [Stored Programming].
4) Select the number of the stored program that contains the features you want to use.
For information on how to register a stored program, refer to "Registering Stored Programs for Build Job" (P.285).
[Build Job - Chapter Start] Screen
1
Select any option.
„
Off
The next stack of documents is copied after the previous stack.
„
On
The next stack of documents is copied from Side 1 of a new sheet of paper.