Fuji Xerox apeosport-v c5585, User Manual

Page: 464 / 493

12 Computer Operations
464
Co
m
p
ut
e
r O
p
er
at
io
n
s
12
E-mail Printing
You can send e-mail with documents attached from a computer to the machine. The
received e-mail is automatically printed from the machine according to the settings on the
machine. This feature is called "E-mail Printing".
Note • If the Authentication feature is enabled, received e-mails are not printed automatically.
• The following file formats can be used: TIFF, PDF, JPEG (JFIF), XPS*, XDW (DocuWorks), or XBD
(DocuWorks binder).
* : XPS stands for XML Paper Specification.
Setup
To use the E-mail Printing feature, the following settings are required. Check with your
system administrator or network administrator whether these settings have been
completed.

E-mail Account Registration
Registering an e-mail account in advance.

Configuration on the Machine
Configuring the required settings on the machine.
For information on E-mail Environment Settings, refer to "8 E-mail Environment Settings" in the Administrator Guide.
Receiving E-Mail
The following describes how to receive e-mails.
1
Use your e-mail software to create an e-mail body, and then attach a document to the e-
mail if necessary.
Important • Only plain text is available for the e-mail body. Change the body text format to plain text on your e-
mail application.
• Any forwarded e-mail (that is attached to another e-mail) cannot be printed.
Note • If the extension of the attached file is other than ".tif", ".tiff", ".pdf", ".jpeg", ".jpg", ".jpe", ".jfif", ".xps"*,
".oxps", ".xdw", and ".xbd", the file may not be printed correctly.
* : XPS stands for XML Paper Specification.
• Up to 31 documents can be attached.
2
Enter the machine's e-mail address as a recipient.
3
Send the e-mail.
Note • The machine prints the e-mail body and the attached documents according to the following
settings. The offset output setting is disabled in all cases.
- E-mail body:
Default values of the PCL print driver for this machine which is installed on the computer.
- TIFF or JPEG formatted attached file:
Default values of the logical printer set in [Memory Settings] of [TIFF/JPEG] in [Language
Emulations] of CentreWare Internet Services.
- PDF formatted attached file:
Settings of PDF Direct Print when [Print Processing Mode] is set to [PDF Bridge] in PDF Direct Print.
Default values of the logical printer configured under [Language Emulations] > [PostScript 3] >
[Logical Printer Number] in CentreWare Internet Services when [Print Processing Mode] is set to
[PS] in PDF Direct Print.