Fuji Xerox apeosport-v c5585 User Manual Download Page 323

Page: 323 / 493

E-mail

323

Sca

Note

•

The certificate of the machine is used for PDF digital signature. A user certificate cannot be used for
the digital signature.

•

This feature is supported only by the ApeosPort series models.



Optimize For Quick Web View

Optimizes the PDF file so that it is displayed faster on a web browser.



DocuWorks Security

Displays [File Format - DocuWorks Security] screen.

Allows you to configure security on the data saved as a DocuWorks file to prevent
unauthorized access.

Refer to "[File Format - DocuWorks Security] Screen" (P.326).



DocuWorks Signature

Displays the [File Format - DocuWorks Signature] screen.

A visible signature added to a file enables to detect alterations in the file, or prevent
impersonation of the sender.



Off

No visible signature is added.



Adds a visible signature using the certificate of the machine.

Note

•

The items used in the signature are different depending on the machine configuration and settings
in the System Administration mode.



Signature Location

Select the position where the signature is displayed when you select [On] in [DocuWorks
Signature].

Note

•

The certificate of the machine is used for DocuWorks digital signature. A user certificate cannot be
used for the digital signature.

•

This feature is supported only by the ApeosPort series models.



XPS Signature

Displays the [File Format - XPS Signature] screen.

A visible signature added to a file enables to detect alterations in the file, or prevent
impersonation of the sender.



Off

No visible signature is added.



Adds a visible signature using the certificate of the machine.

Note

•

XPS stands for XML Paper Specification.

•

This feature is supported only by the ApeosPort series models.

•

The items used in the signature are different depending on the machine configuration and settings
in the System Administration mode.

[File Format - Searchable Text] Screen

Allows you to select whether to perform character recognition in PDF and DocuWorks files.

Summary of Contents for apeosport-v c5585













































































































































































































































































































































































































































































































Search results

Summary of Contents for apeosport-v c5585

Reviews:

Related manuals for apeosport-v c5585

Brands by name

Popular brands

Fuji Xerox apeosport-v c5585, User Manual

Search results

Summary of Contents for apeosport-v c5585

Reviews:

Related manuals for apeosport-v c5585

Brands by name

Popular brands