Fuji Xerox ApeosPort-V C3320, User Manual

Page: 397 / 429

Print
397
Co
m
p
ut
e
r O
p
er
at
io
n
s
12
Print
This section describes how to print with the machine by operating on a computer.
Print Features
The main print features of the machine are as follows:
Printing Using a Print Driver
For more information on print features, click [Help] on the print driver screen to view the print driver's help. For information
on printing, refer to "Printing" (P.399).
Note • Some features become available after you make option settings on the [Configuration] tab. The
unavailable features are grayed out.

Pages Per Sheet (N-Up)
Prints multiple pages onto one sheet of paper.

2-Sided Print
Prints data on both sides of paper.

Poster
Splits one page of print data into multiple sheets of paper and enlarges the printed image
to fit the size of each sheet. Used to create large posters.

Booklet Creation
Performs 2-sided printing and page allocation for printing a booklet in the correct page
order.

Transparency Separators
Automatically inserts a blank sheet of paper as a separator each time a transparency is
printed.

Watermark
Prints preset text, such as "Confidential", over the print data.

Secure Print
Temporarily stores the print data on the machine, to print it with the print command from
the machine. This feature allows you to set a passcode, which is helpful to print confidential
documents.
For information on how to print a Secure Print job, refer to "Secure Print" (P.374).

Sample Set
Before printing multiple sets of a document, you can first print one set for trial, and then
print the remaining sets from the machine.
For information on how to print a Sample Set job, refer to "Sample Set" (P.377).

Delayed Print
Temporarily stores the print data on the machine to print it at specified time.
For information on how to print a Delayed Print job, refer to "Delayed Print" (P.380).