Fuji Xerox ApeosPort-V C3320, User Manual

Page: 225 / 429

Receiving Faxes
225
Fa
x
4
Receiving Faxes
Two modes are available for receiving faxes: Auto Receive and Manual Receive.
In the Auto Receive mode, reception of a fax from a remote machine begins automatically.
In the Manual Receive mode, reception of a fax from a remote machine is manual. This
mode is convenient for confirming the sender or using an external telephone to confirm
whether it is a fax before beginning reception.
Using G3 ID allows the machine to reject faxes from specific fax numbers or unknown fax
numbers. You can register up to 50 fax numbers as rejected fax numbers.
 Rejecting faxes from specific fax numbers:
The machine rejects faxes when the G3 ID sent from the sender’s machine is included in
the registered fax numbers to be rejected.

Rejecting faxes from unknown fax numbers:
The machine rejects faxes when the G3 ID is not sent from the sender’s machine.
G3 ID contains a phone number and other information that are registered in the sender’s
machine.
You can change the default value of [Fax Receiving Mode] in the System Administration mode. For information on how to
change the default value, refer to "5 Tools" > "Fax Service Settings" > "Fax Control" > "Fax Receiving Mode" in the
Administrator Guide.
For information on how to reject faxes from specific fax numbers or unknown fax numbers, refer to "5 Tools" > "Fax Service
Settings" > "Fax Control" > "Block Inbound Faxes" and "Block Unknown Fax Numbers" in the Administrator Guide.
Switching between Auto Receive and Manual Receive
1
Press the <Machine Status> button.
2
Select [Fax Receiving Mode] on the [Machine
Information] screen.
3
Select [Manual Receive] or [Auto Receive].

Manual Receive
Reception of a fax from a remote machine is
manual. This mode is convenient for confirming
the sender or using an external telephone to
confirm whether it is a fax before beginning
reception.

Auto Receive
Reception of a fax from a remote machine begins automatically.