Fuji Xerox ApeosPort-V C3320, User Manual

Page: 147 / 429

Job Assembly
147
Co
py
3
Note • You can also press the <C (Clear)> or <Clear All> button on the control panel to perform the same
operation.

Last Original
Select this button to end scanning documents.

Next Original
Select this button when you have more documents to copy. This button is always selected
when the Combine Original Sets feature is used.

Start
After loading the next document, select this button to scan the next document.
Note • You can also press the <Start> button on the control panel to perform the same operation.
Delete Outside/Delete Inside
(Deleting Outside or Inside of the Selected Area)
This feature allows you specify the areas to be deleted from a document image. Up to three
areas can be specified.
Important • When you use this feature, please be sure to set the original size. For more information, refer to
"Original Orientation (Specifying the Orientation of Loaded Documents)" (P.121).
1
Select [Delete Outside/Delete Inside].
2
Select any option.

Off
No area is deleted.

Delete Outside
Deletes the outside of the selected area.

Delete Inside
Deletes the inside of the selected area.

Area Settings
Displays the [Delete Outside/Delete Inside - Area 1 (Area 2 or Area 3)] screen. You can
specify up to three areas.
Refer to "[Delete Outside/Delete Inside - Area 1 (Area 2 or Area 3)] Screen" (P.148).

Originals
When the original document is a 2-sided document, specify from which side the specified
area is to be deleted.

Both Sides
Applies the settings to both sides of the document.