Fuji Xerox ApeosPort-V C2276, Administrator'S Manual

Page: 237 / 783

Connectivity & Network Setup
237
To
ols
5
The default value is 443.
Important • Do not use the numbers assigned to the other ports.

LDAP - SSL/TLS Communication
Set whether or not to enable the SSL/TLS communications for authentication and searches.
If you enable the LDAP SSL/TLS communications, you must set [Primary Server - Port
Number] and [Secondary Server - Port Number] under [LDAP Server/Directory Service
Settings].
The port number for SSL/TLS communications of the LDAP directory server is normally set
to 636.

SMTP-SSL/TLS Communication
Configure the SSL/TLS communications.
 Disabled
The machine does not communicate in SSL/TLS.
 STARTTLS (If Available)
The machine verifies the certificate and communicates in SSL/TLS. If the verification fails,
the machine does not communicate in SSL/TLS.
 STARTTLS
The machine verifies the certificate and communicates in SSL/TLS. If the verification fails,
the machine cannot perform communication.
 SSL/TLS
The machine communicates in SSL/TLS.
Note • The Internet Fax Direct (P2P) feature does not support SMTP-SSL/TLS communication.

ThinPrint-SSL/TLS Communication
Select whether or not to enable the SSL/TLS communications.

Device Certificate - Client
Select a certificate for HTTP SSL/TLS communications.

Verify Remote Server Certificate
When the machine is operated as an SSL client, select whether or not to verify the certificate
of the remote server.
S/MIME Settings (ApeosPort Series Models Only)
Configure the S/MIME settings to use encryption or signature option on the transmission of
e-mail or fax.

Device Certificate - S/MIME
Select a certificate for S/MIME communications.
For more information on the certificate, refer to "Encryption and Digital Signature Settings" (P.409).

S/MIME Communication
Select whether or not to enable S/MIME communications.

Receive Untrusted E-mail
If you select [No], the machine does not receive the following e-mail: