Fuji Xerox ApeosPort-V C2276, Administrator'S Manual

Page: 201 / 783

Common Service Settings
201
To
ols
5
Check Document Guides Position
Set whether or not to display the confirmation screen when you set the guide position of the
document feeder to 8.5" and start loading. Select from [No] or [Yes].
Document Feeder Quiet Mode
When you use the duplex automatic document feeder B1-PC, allows you to specify whether
or not to reduce the noise of loading a document. You can specify the setting each for
[Copy], [Scan], and [Fax].
When the server fax feature is enabled, [Scan/Fax] is displayed instead of [Scan] and [Fax].
To reduce the noise of the document feeder, select [Enabled].
Drum Cartridge Conservation Mode
Specifies the operation when [Auto Detect] is selected for [Output Color]. Select either [On]
or [Off].
If the machine is set to automatically switch the type of a document (color/monochrome),
select [On], If not, select [Off]. Selecting [Off] outputs in color.
Restrict Recipient Selection Method
Allows you to select whether or not to restrict a fax/Internet fax or an e-mail transmissions
to addresses not registered on the Address Book.
Selecting [Only From Address Book] disables address entry using the keyboard or numeric
keypad, and permits only transmission to addresses registered on the Address Book.
Note • You can also give users authority to deactivate [Restrict Recipient Selection Method]. For more
information, refer to "User Roles and Authorization Groups" (P.430).
Restrict User to Edit Address Book
Specify whether or not to permit local users to add and edit recipients in the Address Book.
When you select [Yes], local users cannot add or edit the Address Book.
Note • You can also give users authority to deactivate [Restrict User to Edit Address Book]. For more
information, refer to "User Roles and Authorization Groups" (P.430).
Auto Validation of Speed Dial Entry
Allows you to select whether the machine automatically validate the number when you use
speed dial. When you select [Validate entry after a fixed time], you can select the time to
auto-validation from [Shorter], [Default], or [Longer].
Note •
This feature does not appear for some models.
Data Indicator
Allows you to set the lighting pattern of the <Data> indicator.

Pattern 1
Lights up when a document is stored in the hard disk (optional) of the machine.

Pattern 2
Lights up when a fax document is in a print queue or a fax received with the Store Fax - Local
Folder feature is stored in the folder.

Pattern 3
Lights up for 30 seconds after a job in the print queue is printed.