Fuji Xerox ApeosPort-V C2276, Administrator'S Manual

Page: 188 / 783

5 Tools
188
To
ols
5
Embedded Plug-ins
Set whether or not to use the embedded plug-ins.
Select [Enabled] or [Disabled].
List of Embedded Plug-ins
Display the embedded plug-in name and status on the list.
Other Settings
You can configure other settings related to the machine.
Fax Service
Switches between the Fax feature and the Server Fax feature.
Note • This feature does not appear for some models. An optional component is required. For more
information, contact our Customer Support Center.
• The Fax and Server Fax features cannot be enabled at the same time.

Scan to Fax
Allows you to use the Fax feature on the machine.

Scan to Fax Server
Allows you to use the Server Fax feature on the machine.
Note • This feature does not appear for some models. An optional component is required. For more
information, contact our Customer Support Center.
Offset Stacking (Center Tray - Lower)
Offsetting means that each set of copies is delivered to the center tray and shifted slightly
to separate it from the previous job. When a set of copies is delivered to the front of the tray,
the next set is delivered to the rear of the tray. Set the offset function for the Center Tray -
Lower. Select from [No Offset], [Offset per Set], and [Offset per Job]. When [Offset per Set]
or [Offset per Job] is selected, the machine slightly shifts the output position per set or per
job (print job) respectively.
Offset Stacking (Right Middle Tray)
Offsetting means that each set of copies is delivered to the center tray and shifted slightly
to separate it from the previous job. When a set of copies is delivered to the front of the tray,
the next set is delivered to the rear of the tray. Set the offset function for the Right Middle
Tray. Select from [No Offset], [Offset per Set], and [Offset per Job]. When [Offset per Set] or
[Offset per Job] is selected, the machine slightly shifts the output position per set or per job
(print job) respectively.
Note • This feature does not appear for some models. An optional component is required. For more
information, contact our Customer Support Center.
Extra Center Tray
Allows you to select whether or not to use the Extra Center Tray.
Select from [Not Installed] and [Installed].
Booklet Offset
When [Offset Stacking (Center Tray)] or [Offset Stacking (Right Middle Tray)] is set to
[Offset per Set], the paper is output to the tray by being slightly displaced by set. If, however,
[Fold & Staple] is selected for booklet settings, the paper is not output by set.