Fuji Xerox ApeosPort-V 4020, Administrator'S Manual

Page: 266 / 611

7 Printer Environment Settings
266
P
rint
e
r En
v
iro
nmen
t Set
tin
g
s
7
Print Overview
This machine can be set up as a local printer by directly connecting the machine to a
computer using a USB interface cable. Similarly, it can be set up as a network printer by
connecting the machine to a network.
Enable the necessary port using the control panel or CentreWare Internet Services.
Note • The print drivers are contained in the Media (Software/Product Manual). For information on the
driver installation procedures, refer to the manual contained in the Media (Software/Product
Manual).
• You can download the latest print driver from our web site.
Using the Machine as a Local Printer
„
USB
Use a USB interface cable to directly connect the machine to a computer.
For more information on how to set up the machine using USB connection, refer to "Installation When Using USB Port"
(P.268).
Using the Machine as a Network Printer
To set up the machine as a network printer, the following protocols are available to connect
the machine.
„
LPD
Use LPD when direct communication between the machine and a computer via TCP/IP is
available.
For more information on how to set up the machine using LPD, refer to "Installation When Using TCP/IP (LPD/Port 9100)"
(P.270).
„
IPP
Use IPP to print via the Internet.
For more information on how to set up the machine using IPP, refer to "Installation When Using Internet Printing Protocol
(IPP)" (P.273).
„
Port 9100
Use Port9100 when the machine uses Port 9100.
For more information on how to set up the machine using Port 9100, refer to "Installation When Using TCP/IP (LPD/Port
9100)" (P.270).
Via Internet
IPP
LPD/Port9100
Network connection
Local connection
USB
Server