Fuji Xerox ApeosPort-V 4020, Administrator'S Manual

Page: 212 / 611

5 Tools
212
Tools
5
„
Description
Enter the description of the access destination with up to 128 single-byte characters.
„
Use User ID
z No
- When [Login Type] is set to [Login to Remote Accounts]:
The machine accesses the remote service using the user information authenticated on
the machine.
- When [Login Type] is set to [No Login Required] or [Login to Local Accounts]:
The machine prompts the user to input user ID and password to access Web
applications.
z Yes
Allows you to enter a user ID and password into [User ID] and [Password] respectively,
which are used when the machine accesses the remote service.
„
User ID
Enter the user ID to access the remote service with up to 128 characters.
Important • Depending on the settings on the remote service, the entry for [User ID] may be invalid. Check the
settings on the remote service.
Note • Along with [User ID], set also [Password]. [User ID] will be invalid unless [Password] is set.
• All the specified settings are ignored if the remote service to be connected requires other than a user
ID and its password for authentication.
„
Password
Enter the password for the user ID with up to 128 characters.
„
Machine/Authentication Notification
Set whether or not to notify the remote server of machine information and user
authentication information every time the machine connects to the remote service.
Note • The remote service determines whether to use the information. No need to configure settings on the
control panel.
„
Notify User Authorization Information
Set whether or not to notify the remote service of user authorization information every time
the machine connects to the remote service.
„
Delete All Settings
Deletes all settings registered.
„
Functional Code
Set the functional code as necessary when you use the ApeosPort cooperational services.
Specify the value between 0 and 65535.
Other Settings
When Sending User Details
Set whether or not to display a confirmation screen when the machine send user
authorization information (authorized user ID, password, e-mail address, and the services
restricted) to the remote server.
Note • Even when you select [No Confirmation Required], if there is a flaw in the authentication
information, a confirmation screen is displayed.