Fuji Xerox ApeosPort-V 4020, Administrator'S Manual

Page: 195 / 611

Fax Service Settings
195
Tools
5
„
10pps
Pulse dialing line.
G3 Line 1 - Line Type
Set the line type.
„
PSTN
Subscriber telephone line.
„
PBX
Private branch exchange.
Internet Fax Control
You can configure the settings related to the Internet fax control.
Internet Fax Path
Set the Internet fax communication path.
„
Via E-mail Server
Sends e-mail via an SMTP server.
„
Direct (P2P)
Directly sends to the machine with the Internet Fax feature, without going through an SMTP
server.
You can specify the following two types of e-mail address for the Internet Fax feature:
z Specifying a host name
@ must be followed by FQDN.
Example: local-part@device.domain.jp
z Specifying an IP address
@ must be followed by an IP address with brackets.
Example: local-part@[192.0.2.1]
Profile for Broadcast Job
Set the default value for an Internet fax profile when performing an Internet fax broadcast
send.
A profile is specified to restrict attribute information such as image resolution and paper size
for transmissions between Internet Fax-enabled machines.
Important • The supported TIFF-file profiles vary depending on the destination Internet Fax-enabled machine.
Before specifying a profile, check the profile that the destination machine supports.
„
TIFF-S
The Internet fax standard profile.
„
TIFF-F
Select this profile when you specify [Superfine] for [Resolution].
„
TIFF-J
Select this profile for sending documents in JBIG.