Fuji Xerox ApeosPort-V 4020, Administrator'S Manual

Page: 194 / 611

5 Tools
194
Tools
5
„
A/B Series Size
You can select a size from A and B series sizes such as A4 and B5.
„
Inch Size
You can select a size from Inch series sizes such as 8.5 x 11" and 8.5 x 14".
„
Others
You can select a size from other sizes such as photo and postcard.
Local Terminal Information
You can set the local terminal information, including a local name and company logo.
For information about how to enter characters, refer to "Entering Text" (P.35).
Local Name
Register the name of the local terminal as the local name.
The local name is shown in the recipient's touch screen or Activity Report. Depending on the
recipient's device, however, it may not be displayed.
Specify a local name with up to 20 single-byte characters using the keyboard displayed or
the numeric keypad.
Company Logo
Register the sender name (company logo). The company logo is printed in the Transmission
Header Text or Cover Page. Specify a company logo with up to 60 single-byte characters
using the keyboard displayed or the numeric keypad.
Note • If [Line 1 - Company Logo] is not registered, the company logo is used.
Machine Password
Set the machine password when you want to limit the other parties that can send faxes.
When the machine password is set, only a party that sends the correct machine password
by F code is allowed to send or poll. Note that this means that faxes cannot be accepted
from a fax without the F Code feature.
Line 1 - Company Logo
Register the sender names for lines 1. The sender name is printed in the Transmission
Header Text or Cover Page. Enter up to 60 single-byte characters using the keyboard
displayed or the numeric keypad.
G3 Line 1 - Fax ID
When using G3 communications, register the G3 ID. The G3 ID is normally set to the local
terminal fax number.
Specify a G3 ID with up to 20 digits using the keyboard displayed or the numeric keypad.
Note • A G3 ID (fax number) can consist of not more than 20 digits, including 0 to 9, +, and space.
G3 Line 1 - Dial Type
Set the dial type.
„
Tone
Tone dialing line.