Fuji Xerox ApeosPort-V 4020, Administrator'S Manual

Page: 114 / 611

5 Tools
114
Tools
5
You can select from [Soft], [Normal], and [Loud]. To disable the sound, select [Off].
You can select the target jobs to play the sound.
Fault Tone
Set the volume to be sounded when a job fails.
You can select from [Soft], [Normal], and [Loud]. To disable the sound, select [Off].
You can select the target jobs to play the sound.
Auto Clear Alert Tone
Set the volume to be sounded at five seconds before automatically returning to the initial
screen when [Auto Clear] is set to [On].
You can select from [Soft], [Normal], and [Loud]. To disable the sound, select [Off].
For more information, refer to "Auto Clear" (P.111).
Alert Tone
Set the volume to be sounded when a fault such as a paper jam occurs, and the job remains
in failure state.
You can select from [Soft], [Normal], and [Loud]. To disable the sound, select [Off].
Out of Paper Warning Tone
Set the volume to be sounded when a job is suspended because there is no paper in a tray.
You can select from [Soft], [Normal], and [Loud]. To disable the sound, select [Off].
Low Toner Alert Tone
Set the volume to be sounded when the toner cartridge needs replacing.
You can select from [Soft], [Normal], and [Loud]. To disable the sound, select [Off].
Stored Programming Tone
Set the volume to be sounded while a stored program is being registered.
You can select from [Soft], [Normal], and [Loud].
This tone cannot be disabled.
Stored Programming Complete Tone
Set the volume to be sounded when the call of a stored programming registered is
completed.
You can select from [Soft], [Normal], and [Loud]. To disable the sound, select [Off].
Line Monitor Volume
When sending a fax, you can relay the sound on the telephone line until the connection is
made through the speakers on the machine. This is convenient for Fax Information Services
without using the telephone receiver.
You can select a volume level from [Soft], [Normal], and [Loud]. To disable the sound, select
[Off].
Ringing Volume
Set the volume to be sounded when the machine receives a fax.
You can select from [Soft], [Normal], and [Loud]. To disable the sound, select [Off].