Fuji Xerox apeosport-iv C3370, Administrator'S Manual

Page: 784 / 889

Appendix
784
App
e
ndix
16
„
Interface-dependent
You can set a printer language for each host interface by using CentreWare Internet
Services. The machine switches to a printer language corresponding to the host interface
that received data.
Fonts
This section explains the fonts used for emulation.
Available fonts
The following fonts can be used for ESC/P-K emulation:
„
ESC/P-K Emulation
Available outline fonts are as follows:
z Roman
z Sans serif
z ShuSong
z OCR-B
User-defined Characters
On the machine, you can use user-defined characters.
The total capacity of memory for storing user-defined characters and other user-defined
data can be set on the control panel. This value is retained after the machine is turned off.
User-defined characters are registered as bitmap fonts, and cannot be shared among
different printer languages.
Font Caching
To ensure hi-speed printing, outline fonts of up to a certain size are cached. Outline fonts
are converted into bitmap data temporarily and then printed. To minimize this processing
time, the processed bitmap data is saved in the memory. This process is called font caching.
The saved bitmap data is deleted when you turn the machine off or reset it.
Output Feature
This section describes the machine's output feature.
Outputting a Pending Print Job
The printing of jobs already received by the machine can be prioritized over other jobs.
Reference
z
For information on prioritizing the printing of jobs already received by the machine, refer to "Job Status" > "Printing Pending Jobs"
in the User Guide.