Fuji Xerox apeosport-iv C3370, Administrator'S Manual

Page: 466 / 889

Authentication and Accounting Features
466
Au
the
n
tica
tion a
nd Ac
coun
ting
Fea
tu
res
14
Overview of Authentication and Accounting
Feature
This section overviews the authentication feature and the accounting feature.
Using authentication feature allows you to restrict the access to the machine, restrict the
use of each service, and count the use of services per user.
Types of User
When the Authentication feature is enabled, users are classified into the following three
types.
Note
z When the Authentication feature is disabled, users are classified as either system administrator or local user.
„
System Administrator
The system administrator can register and change system settings to adapt to the
environment to be used.
A system administrator uses a specific user ID called a system administrator’s user ID.
„
Login User
A login user is a user registered on the machine or a remote server. To use restricted
services, enter the user ID and passcode on the screen.
A user ID of a login user can be associated with some sub users in accordance with the
intended use.
Note
z An optional component is required to use the sub user feature. For more information, contact our Customer
Support Center.
„
Unregistered User
An unregistered User is a user not registered on the machine.
An unregistered user cannot use restricted services.
User Roles and Authorization Groups
You can select a user role and an authorization group for each user.
For a user registered on a remote server, these settings are effective only when ApeosWare
Management Suite or LDAP is used. When using LDAP, configure the settings on
CentreWare Internet Services.
Important
z
When [Login Type] is set to [Login to Local Accounts] and [Accounting Type] is set to [Network Accounting],
an authorization group cannot be assigned to a user. Therefore, the features configured for the authorization
group, such as the feature to temporarily disable forcible printing, are not available.
User Roles
Set the scope of administration authority for each login user. The authority of system
administrator or account administrator can be given to a specified login user.
„
System Administrator
The same authority as a system administrator is given except for the following operations: