Fuji Xerox apeosport-iv C3370, Administrator'S Manual

Page: 277 / 889

Scan Service Settings
277
T
ools
5
Original Size Defaults
Set the document size displayed in [Original Size] in the [Layout Adjustment] screen. You
can assign a document size to each of the 17 buttons other than [Auto Detect].
If you frequently use non-standard size paper for scanning, assigning the paper sizes to the
buttons will save your time to specify the size each time.
„
A/B Series Size
You can select a size from A and B series sizes such as A4 and B5.
„
Inch Size
You can select a size from Inch series sizes such as 8.5 x 11" and 11 x 17".
„
Others
You can select a size from other sizes than the above series such as photo and postcard
sizes.
„
Custom Size
You can enter any size. Set the width (X) from 15 to 432 mm, and the height (Y) from 15 to
297 mm in 1 mm increments.
Output Size Defaults
Set the sizes to display in [Output Size] when selecting [Enter Output Size] for scanning
documents at [Reduce/Enlarge] in the [Layout Adjustment] screen.
You can assign any output size to output size buttons.
Assigning the output sizes to the buttons will save your time to specify the size each time.
„
A/B Series Size
You can select a size from A and B series sizes such as A4 and B5.
„
Inch Size
You can select a size from Inch series sizes such as 8.5 x 11" and 11 x 17".
„
Others
You can select a size from other sizes than the above series such as photo and postcard
sizes.
Reduce/Enlarge Presets
Set the magnifications displayed as [Preset %] which are displayed when [Proportional %]
is selected under [Reduce/Enlarge] in the [Layout Adjustment] screen.
You can assign any magnification to the Reduce/Enlarge Preset buttons other than
[100%].
„
Preset %
Select a ratio from standard magnification ratios.
„
Variable %
You can specify a magnification from 25 to 400% in 1% increments.