Fuji Xerox apeosport-iv C3370, Administrator'S Manual

Page: 263 / 889

Connectivity & Network Setup
263
T
ools
5
Select whether or not to verify a server certificate when [PEAP/MS-CHAPv2] is selected in
[Authentication Method].
Certificate Revocation Retrieval Settings
Configure the settings for certificate revocation retrieval.
„
Level of Certificate Verification
Select a level of certificate verification from [Low], [Medium], or [High].
Selecting [Low] does not verify the validity of certificates.
Selecting [Medium] verifies the validity of certificates. If a certificate cannot be verified
because of a network error or any other problems, the certificate is determined as valid.
Selecting [High] verifies the validity of certificates, and determines only certificates that
have not been revoked as valid.
„
Retrieval of Certificate Status
Select the method to verify the validity of certificates.
Select [By Retrieving CRL] if the machine retrieves a CRL (Certificate Revocation List) from
the validation authority to verify the revocation status of the certificate. Select [By OCSP] if
the machine uses OCSP (Online Certificate Status Protocol), which can verify the validity
revocation status of the certificate, to have the certificate authority or validation authority
check the revocation status.
„
Auto Retrieval of CRL
Select whether or not to automatically retrieve a CRL.
„
CRL Retrieval Time-Out
Specify a time-out value to retrieve a CRL from 5 to 60 seconds in 1 second increments.
„
Send Query to OCSP Responder With
Select how to access an OCSP responder from [URL as Specified in Certificate] or [URL as
Specified by Administrator].
„
URL of OCSP Responder
Enter the URL of an OCSP responder when [URL as Specified by Administrator] has been
selected for [Send Query to OCSP Responder With]. Up to 255 characters are allowed.
„
OCSP Communication Time-Out
Specify a time-out value for OCSP communication from 5 to 60 seconds in 1 second
increments.
Other Settings
You can set the following network related items.
Protocol to Receive E-mail
Select from [SMTP] and [POP3] depending on your environment.
Add Domain Name to User Name
Select whether or not to add domain names to user names.