Fuji Xerox apeosport-IV 6080, Administrator'S Manual

Page: 649 / 705

Notes and Restrictions
649
Ap
pe
ndix
16
Notes and Restrictions
This section describes the notes and restrictions to observe when using the machine.
Notes and Restrictions on the Use of the Machine
„ Notes on Switching Off the Main Power and Power
Power off processing is performed internally on the machine for a while after the power
is switched off. Therefore, do not switch the main power off immediately after switching
the power off. Do not switch the main power off while the touch screen displays a
screen or the <Energy Saver> button blinks. Switching off the main power may damage
the hard disk and the memory or cause a machine malfunction. In addition, the machine
will not be not activated soon if you switch on the power before the touch screen gets
blank. Confirm that the touch screen is blank before switching on the power.
„ Options
z
To use the machine as a PostScript printer, the Adobe PostScript 3 Kit (optional) is
required.
„ Installing and Moving the Machine
z
When moving the machine to another location, contact our Customer Support
Center.
z
When the machine is operating, do not subject it to shock.
z
When closing the document cover, be careful not to pinch your fingers.
z
Do not place any objects near the ventilation openings of the machine's exhaust fan.
„ Memory Expansion
Commercially available memory cannot be used for the machine. Be sure to use the
optional extension memory we provide, or we cannot guarantee proper operation of the
machine if a problem occurs. Our service representative installs the optional
component.
„
Character Code
In data transmission from a computer or read processing of data in a medium such as
a USB memory device, if characters that the machine does not support are included in
folder and file names, these characters may not be displayed correctly.
„ Scanning Documents to Copy during Warm-up
After turning on the machine, or after exiting the Energy Saver mode, the machine
scans the first document partially, and stops. This means that the machine does not
accept any documents to be copied unless it completes the warm-up cycle. This differs
from the other multifunctional machines of Fuji Xerox. For the Fax and Scan jobs, the
machine accepts documents during the warm-up cycle.
„ Output Destination
When you change the finisher to install, reconfigure the output destination under
[Tools] > [System Settings] > [Copy Service Settings] > [Copy Defaults] > [Output
Destination].
You can also change the output destination for Print E-mail, Private Folder Printed
Files, and Fax Received as required.