Fuji Xerox apeosport-IV 6080, Administrator'S Manual

Page: 47 / 705

Loading Paper
47
P
ape
r a
nd O
the
r M
edia
2
Loading Tab Paper in Tray 5 (Bypass)
The following describes the procedure for loading tab paper into Tray 5 (Bypass).
Important • Tab paper can be used only for [Tab Margin shift], Covers, and Separators.
Note • Fan the paper well before loading paper in a tray. It prevents paper from sticking to each
other and reduces paper jams.
1
Open the Tray 5 (Bypass).
Note • If necessary, pull out the extension tray.
The extension tray can be extended in
two stages. Pull out the extension tray
gently.
2
Hold the center of the paper guides and slide
them to the desired paper size.
3
Load paper with the side to be copied or
printed on facing up, inserting the paper until
its edge lightly touches against the paper
feed entrance.
Important • Do not load mixed paper types in tray.
• Do not load paper above the maximum fill
line. It might cause paper jams or
machine malfunctions.
• When loading tab paper, place the paper
with its tab side to the left as shown in the
illustration.
4
Adjust the paper guides to align the edges of
the paper loaded.
5
Instruct a copy or print job.