Fuji Xerox apeosport-IV 6080 Administrator'S Manual Download Page 328

Page: 328 / 705

10 Using IP Fax (SIP)

328

Using IP

x (SIP

)

IP Fax (SIP) Overview

IP Fax (SIP) is a fax feature that sends and receives document data via the IP network

of a corporation (the intranet). The IP Fax (SIP) complies with ITU-T Resolution T.38.

Because the IP Fax (SIP) uses the existing IP network for communications, you can

reduce the telecommunications costs compared to a conventional G3 fax machine that

uses the public telephone line.

Note

•

The communication between IP Fax (SIP) machines is available only between the machines
that support the IP Fax (SIP) feature (except for Able 1407

). An "IP Fax (SIP) machine" in

this guide refers to the IP Fax (SIP) -enabled machine manufactured by Fuji Xerox.

Preparations

This section describes the prerequisites to use the IP fax (SIP) feature on the machine.

System Requirements for the Machine

IP Fax (SIP) Kit

The machine is connected to the intranet.

The following equipment can also be used but not required.

SIP server

VoIP gateway (

to communicate with a G3 fax machine connected to the public phone line

)

Note

•

For more information about the SIP server and VoIP gateway, contact your system
administrator.

•

Another optional component is required to use the IP Fax (SIP) feature for some models.

Settings by System Configuration

To use the IP Fax (SIP) feature, configure the following settings.

O: Required X: Not supported

Settings

Systems

Enabling

port and

setting up

TCP/IP

Configuring

SIP User ID

Configuring

Fax environ-

ment

Configuring

SIP server

Registering

VoIP

gateway

IP Fax (SIP)
machine only

SIP server only

VoIP gateway
only

SIP server and
VoIP gateway

Summary of Contents for apeosport-IV 6080

































































































































































































































































































































































































































































































































































































































































































































Search results

Summary of Contents for apeosport-IV 6080

Reviews:

Related manuals for apeosport-IV 6080

Brands by name

Popular brands

Fuji Xerox apeosport-IV 6080, Administrator'S Manual

Search results

Summary of Contents for apeosport-IV 6080

Reviews:

Related manuals for apeosport-IV 6080

Brands by name

Popular brands