Fuji Xerox apeosport-IV 6080, Administrator'S Manual

Page: 236 / 705

5 Tools
236
T
ools
5
„ Output
Configure the stapling, hole punch, and output destination settings.
z
Staple
Set the position for stapling.
z
Hole Punch
Set the position for punching.
z
Output Destination
Set the output destination.
E-mail Notification
You can receive an e-mail notification when a file is saved in a folder or a job flow ends.
„ Name/E-mail Address
Set the recipient of the e-mail notification.
„ Message
Enter a message that is displayed in the e-mail message body.
„ When to Notify
Select the e-mail notification timing from [When file is stored] and [At the end of Job Flow].
„ Delete Recipient
Deletes all information for the selected recipient.
„ Edit
Allows you to check or change the recipient selected.
For more information on the [Edit Recipient] screen, refer to "5 Scan" in the User Guide.
„ Close Menu
Deselects the selected item.
Edit/Delete
You can check the content of a job flow sheet, and edit, copy, or delete it.
Note • Some operations may be restricted according to types of job flow owners, authentication
settings, and user types. For more information, refer to "Authentication for Job Flow Sheets
and Folders" (P.379).
„ Delete
Deletes the selected job flow sheet.
„ Copy
Creates a duplicate of the selected job flow sheet. You can create a new job flow sheet based
on the duplicate.
The procedure of creation is the same as creation of a new job flow sheet. For more information, refer to
"Create New Job Flow Sheet" (P.231).
„ Edit
You can edit the selected job flow sheet.
The procedure of change is the same as creation of a new job flow sheet. For more information, refer to
"Create New Job Flow Sheet" (P.231).