3 Copy
72
Co
py
3
Gloss Level (Enhancing Gloss of the Document)
This feature lowers the copying speed to add a glossy touch to output copies.
The following paper types are available for this feature:
Plain paper, recycled paper, side 2 paper, heavyweight paper 1 (106 - 176 g/m
2
),
heavyweight paper 1 (side 2), coated paper (106 - 176 g/m
2
), coated paper 1 (side 2),
and punched paper
Note
• Whether [Gloss Level] is displayed on the [Image Quality] screen depends on the setting in
the System Settings. Refer to "6 System Settings" > "Common Settings" > "Other Settings" >
"Gloss Level" in the Administrator Guide.
• When you use the Build Job feature, the gloss level can be set for each copy set. In that
case, the machine may suspend the copy job each time the machine adjusts the settings. In
addition, the copies are separated at the positions where the gloss level changes.
1
Select [Gloss Level].
2
Select [Normal] or [Enhanced].
