3 Copy
56
Co
py
3
3
Set the number of copy sets with the numeric keypad. The new quantity must include
the number of copies that have already been printed. You cannot enter a number less
than the number of copies that have already been printed.
4
Press the <Start> button.
Interrupting the Copy Job
You can temporarily stop the copy job to have the machine process another job.
1
Press the <Interrupt> button.
Note
• The interrupt indicator lights
up to indicate that the
machine is in the interrupt
mode.
2
Load a document and set features if necessary.
3
Set the number of copy sets with the numeric keypad.
4
Press the <Start> button.
5
After you have finished making the interrupt copy, press the <Interrupt> button.
Note
• The interrupt indicator goes out to indicate that the interrupt mode is exited.
• If you used the document glass to copy the document, remove the document from the
document glass.
6
Press the <Start> button. The suspended copy job is resumed.
1
2
3
4
5
6
7
8
9
0
#
C
<Interrupt>
button
