Configuring/Starting Job Flow
177
S
e
nd fr
om M
a
ilbox
5
Configuring/Starting Job Flow
Job flow is a feature for executing a series of registered actions.
A job flow operates on documents stored in a mailbox, and starts in either of the
following ways: 1) manually or automatically start a job flow when a document is stored
in a mailbox, or 2) select a job flow to act on documents stored in a mailbox manually.
To automatically start a job flow, you must make a link with a mailbox and a job flow
sheet in advance. Documents are automatically processed with the job flow sheet when
they are stored in the linked mailbox.
Important • If the Authentication feature is not used, a job flow created in [Send from Mailbox] can only
be used/edited/duplicated/deleted through the mailbox where the job flow is created. This
type of job flow is not displayed on the [Job Flow Sheets] screen. When using the
Authentication feature, job flows whose owners are authenticated are displayed on the [Job
Flow Sheets] screen.
Features that can be registered are listed below.
Forward
Multiple forwarding recipients can be configured for each forwarding method.
z
FTP
Forwards via FTP. Up to 2 recipients can be specified.
z
SMB
Forwards via SMB. Up to 2 recipients can be specified.
z
Forwards via E-mail. Up to 100 recipients can be specified.
Documents in a mailbox can be printed.
Some features are unavailable depending on the store type of the document.
O: Available
X: Not available
1
On the [Document List] screen,
select documents.
2
Select [Job Flow Settings].
Output
Input
FTP
SMB
Scanning
O
O
O
O
Print Stored
X
X
X
X
