Output Format
163
Sca
n
4
1
Select [Split Send].
2
Select [Split by page].
Off
The data is not split.
Split by page
The data is split in pages.
File Name (Specifying a Name for the File to be Sent)
When using the [E-mail] or [Scan to Mailbox] feature, you can specify a name for the
document to be sent.
Auto Set
The file name is "img-xxx-yyy.zzz" (where xxx is the date and time, yyy is the page
number, and zzz is the extension).
The extension depends on the setting in [File Format].
z
When [Multi-page TIFF] or [TIFF] is set for [File Format]: tif
z
When [PDF] is set for [File Format]: pdf
z
When [DocuWorks] is set for [File Format]: xdw
To set the file name
1
Select [File Name].
2
Enter a name of up to 128 characters using the displayed keyboard.
For information on how to enter characters, refer to "Entering Text" (P.46).
Note
• When each page is saved as one file, the page number is added to the end of each file
name.
Reply To (Specifying a Reply Address)
When using the [E-mail] feature, you can specify the address for reply.
Note
• In one of the following cases, you cannot enter an address into the [Reply To] field:
- When an address for [Reply To] has already been obtained by using the remote
authentication (ApeosPort models only)
- When the machine does not allow you to change the address specified in the [From] field.
