Output Format
105
Co
py
3
Face down
Copies are output facing down and delivered from the last page.
Face Up (Reverse Order)
Copies are delivered from the first page facing up.
Note
• Whether [Face Up (Reverse Order)] is displayed depends on the system setting. For
information, refer to "6 System Settings" > "Copy Mode Settings" > "Copy Control" > "Output
Orientation - Reverse Order" in the Administrator Guide.
Folding (Outputting Bi-Folded/Tri-Folded Paper)
This feature allows you to fold copies in half / in three.
Note
• This feature does not appear for some models. An optional package is necessary. For more
information, contact our Customer Support Center.
• The supported paper orientation is only
. Select the tray whose orientation is set to
.
• Z Tri-Fold and C Tri-Fold can only be applied to A4 paper and 8.5 x 11" paper.
1
Select [Folding].
2
Select any item.
Off
Does not fold the copies.
Z Tri-Fold
Folds copies in three with the printed side inside.
C Tri-Fold
Folds copies in three with the printed side outside.
Bi-Fold
Folds copies in half.
Print Inside
Folds copies so that the image is printed inside.
Print Outside
Folds copies so that the image is printed outside.
Preset Repeat Image (Making Multiple Copies on a Single Sheet)
This feature allows you to repeatedly copies one original onto equally divided areas
according to the specified number of copies.
Note
• When anything other than [Auto %] is selected for [Reduce/Enlarge], image loss may occur
depending on the image size.
