Fuji Xerox ApeosPort-II C3300, User Manual

Page: 389 / 635

Supplies
387
M
a
ch
in
e St
at
us
12
Supplies
You can check the status of consumables on the [Supplies] screen. The status of
consumables is shown as "OK", "Replace Soon (Order Now)", or "Replace Now". For
toner, the amount is shown in percentage (0 to 100%).
The following describes the procedure for checking the status of consumables.
For information on replacing consumables, refer to "Maintenance" (P.409).
1
Press the <Machine Status>
button.
2
Select the [Supplies] tab.
Note • Select [ ] to return to the
previous screen or [ ] to
move to the next screen.
On the [Supplies] screen, you can check the following items.
Note • The items displayed vary depending on the options installed.
• Staple Cartridge is displayed when one of the following options is installed: B Finisher, C
Finisher, and C Finisher with Booklet Maker.
• Punch Scrap Container is displayed when one of the following options is installed: C Finisher
and C Finisher with Booklet Maker.
• Booklet Staple Cartridge is displayed when C Finisher is installed.
Important • If using a partly consumed toner cartridge (such as a toner cartridge removed from another
ApeosPort-II C4300/C3300/C2200 or DocuCentre-II C4300/C3300/C2200 unit), the status
shown may not match the actual remaining amount. When replacing toner cartridges, we
recommend you use new ones.
z
Black Toner [K]
z
Drum Cartridge [A4]
z
Cyan Toner [C]
z
Waste Toner Container[B]
z
Magenta Toner [M]
z
Staple Cartridge [R1]
z
Yellow Toner [Y]
z
Booklet Staple Cartridge [R2]
z
Drum Cartridge [A1]
z
Booklet Staple Cartridge [R3]
z
Drum Cartridge [A2]
z
Hole Punch Container [R4]
z
Drum Cartridge [A3]