Fuji Xerox ApeosPort-3 C4400, User Manual, Page: 45 / 341

Circuit Breaker
43
P
ro
d
u
c
t O
ver
view
2
Circuit Breaker
The machine is provided with a circuit
breaker.
In the event of a current leakage, the breaker
will automatically cut off the power circuit to
prevent any leakage or fire from occurring.
The <RESET> button is normally in a
pressed-in state as shown in the figure on the
right. When the machine is to be left unused
for a long period of time or is to be moved,
lightly press the <TEST> button with the tip of
a ball-pen or other fine-tipped object to
cancel the pressed-in state of the <RESET> button.
Once a month, check the breaker for correct operation. Also, make sure that it is
earthed. If not, the breaker cannot detect current leakage which can cause electric
shock.
When there is a fault in the circuit breaker, contact our Customer Support Center.
Note • The RESET button automatically turns the machine off when a current leakage is detected.
Normally, you do not operate the button.
• When you release the depressed RESET button, make sure that the machine has been
switched off.
For information on how to check if the circuit breaker is working, refer to "Electrical Safety" (P.16).
Power switch
Reset button
Test button