Fuji Xerox ApeosPort-3 C4400, User Manual

Page: 135 / 341

Operations during Faxing
133
Fa
x
4
„ If the screen shown in Step 2 does not appear even after you press the <Stop>
button on the control panel:
1
Press the <Job Status> button.
2
Select the job to cancel, and then select
[Cancel].
Changing the Scan Settings
You can change the scan settings while scanning the document.
1
Select [Next Original].
2
Set [Resolution], [Original Size], and
[Lighten/Darken].
For each setting, refer to "Resolution (Specifying the
Scanning Resolution)" (P.151), "Original Size
(Specifying the Scan Size for the Original)" (P.153),
or "Lighten/Darken (Adjusting Fax Density)" (P.149).
3
Press the <Start> button.
1 2 3
4 5 6
7 8 9
0 #
C
<Job Status> button