Fuji Xerox ApeosPort-3 C4400, User Manual

Page: 123 / 341

Job Assembly
121
Co
py
3
[Copy Job] screen
The [Copy Job] screen is displayed when copying begins.
„
Cancel
The document data stored by [Combine Original Sets] is cleared and the copying is
cancelled.
Note • The same operation is performed if you press the <C> button or <Clear All> button on the
control panel.
„ Last Original
Select this to end scanning documents.
„ Next Original
Select this when you have more documents to copy. This button is activated when the
[Combine Original Sets] feature is used.
„ Start
Load the next document, and select [Start] to start scanning.
Note • The same operation is performed if you press the <Start> button on the control panel.
Delete Outside/Delete Inside
(Deleting Outside or Inside of the Selected Area)
This feature allows you specify the area to be deleted from a document image. 3 areas
can be specified.
1
Select [Delete Outside/Delete Inside].
2
Select any item.
„ Off
No area is deleted.
„ Delete Outside
Deletes the outside of the selected area.
„ Delete Inside
Deletes the inside of the selected area.