Fuji Electric ZSS-7, Instruction Manual

Page: 92 / 116

INZ-TN7ZSS-E
- 85 -
6.8 Selecting analog output
There are two types of analog output (4 to 20mA DC output) as a standard specification. Measurement value
and O
2
conversion value can be output individually. Both of average value and instantaneous value can be
output arbitrary.
Default value is set to “No”, so be sure to set it after installation.
Select “AO Select” from the “Menu” screen, and press the
key.
6.8.1 Setting of analog output
When the measurable component is 1, “Component” or “No” can be selected. When there is O
2
conversion
output, “O
2
Conversion” is also selectable.
Select the analog terminal to be output by the
or the key. Press the key to
move the cursor to “Output Component” setting.
( )
Select the component to be output by the
or the key. Press the key to validate
the set input value.
ENT
2006-04-01
12:00:00
2006-04-01
12:00:00
Menu
Zero Calibration
Alarm Log
Display/Output
Pasword
Parameter Setting
Input Signal
Span Calibration
Alarm Setting AO Select
Output Hold Analyzer Information
Analog Output
Analog Output 1 （ＡＯ１）
HC
Analog Output 2
（ＡＯ２）
cv HC
Analog Output
Analog Output ᲫᲢ᲻᳉ᲫᲣ
No
Analog Output
Წ Ტ᲻᳉ᲬᲣ
2006-04-01
12:00:00
No
Analog Output
Analog Output
ᲫᲢ᲻᳉ᲫᲣ
᳂Ჽ Ͱ
Analog Output Წ Ტ᲻᳉ᲬᲣ
2006-04-01
12:00:00
No
ENT