Fuji Electric ZSS-7, Instruction Manual

Page: 82 / 116

INZ-TN7ZSS-E
- 75 -
6.6 Display/AO setting
Make a setting of “Inst./Avg.” or “Wet/Dry” of the measurement value displayed on the “Measurement”
screen.
Explanation of setting items
“Inst./Avg.” : Make a setting of “instantaneous value” or “average value” for each measur-
able component.
“Wet/Dry” : Make a setting of “Wet” or “Dry” for each measurable component. When
“Dry” is set, H
2
O setting of the “Analog Input” is required.
Select “Display/AOSetting” from the “Menu” screen, and press the
key.
6.6.1 Setting of instantaneous/average value
Make a setting of “Instantaneous value” or “Average value” for each measurable component. The setting is
reflected on the display on the “Measurement” screen.
O
2
conversion value can be arbitrarily selected even if the previous measurement value is set as instantane-
ous value (or average value).
When the average value is set, moving average processing is performed at the time set at “Average Period”
on the “Parameter Setting” screen.
ENT
2006-04-01
12:00:00
Inst.
Inst.
Wet
Wet Remote
HC
HC
Avg.
Inst.
Dry
Wet
Range1 0 ~ 50.0 ppm
Range2 0 ~ 1000 ppm
Range1 0 ~ 50.0 ppm
Range2 0 ~ 1000 ppm
2006-04-01
12:00:00
Menu
Zero Calibration
Alarm Log
Display/Output
Pasword
Parameter Setting
Input Signal
Span Calibration
Alarm Setting AO Select
Output Hold Analyzer Information
Gas Range Cotrol
Display/AOSetting
cv