Temperature Controller MODBUS SIO Driver
GP-Pro EX Device/PLC Connection Manual
71
6
Supported Devices
The following table shows the range of supported device addresses. Please note that the actually supported range
of the devices varies depending on the External Device to be used. Please check the actual range in the manual of
your External Device.
Input address of external device in the dialog below.
The following description explains the memory maps for each parameter.
<When using Bit Data>
Bit Data (Read Only) : Function [02H]
Example: For the parameter "Alarm1 ON/OFF" of Coil No. 10001, the Display’s designated address is as follows.
Use the first digit of the Coil No. (00001 -, 10001 -) to designate the device.
1.
Device
Set Device.
2.
Reference
The list of available identifiers is displayed.
Click the identifier to use and press "Select," and the address is entered.
3.
Address
Set Address.
The combination of identifier and address differs depending on the external device.
Relative
Address
Coil No.
*1
*1
Coil No. is the address that is assigned by the Display.
Type
Memory
Contents
Read-out Data
0000H
10001
Bit
Alarm1 ON/OFF 0: Alarm1 OFF, 1: Alarm1 ON
0001H
10002
(Reserved)
0002H
10003
(Reserved)
0003H
10004
(Reserved)
0004H
10005
Bit
Alarm2 ON/OFF 0: Alarm2 OFF, 1: Alarm2 ON
0005H
10006
(Reserved)
:
:
:
:
:
1
2
3
1 0001
Address (The last four digits of the Coil No.)
Device (The first digit of the Coil No.)