Fuji Electric MONITOUCH X1 Series, Hardware Specifications

Page: 70 / 180

5.2 System Menu and Status Bar
5-11
1
2
3
4
5
6
7
8
9
10
5.2.2 Status Bar
The status bar is displayed at the same time as the system menu in the bottom right of the screen. The status of communications with
connected devices is indicated.
Display Method
RUN mode
Press two of the four corners of the X1 series unit screen one by one to display the status bar.
1. Press one corner of the screen for at least 2 seconds and release your finger when there is a beep.
2. Then within one second, press a different corner and hold for at least 2 seconds to display the status bar.
* If any of the items given below are placed in a corner on the screen, the system menu will not be displayed. Be sure to press a corner
where none of the items are placed. If these items are placed in all four corners of the screen, switch the screen to one that has open
corners and perform the above procedure to display the system menu.
Switches, data display parts with switches, display areas, scrolling messages, slider switches, scroll bars, and table data display parts
Local mode
Press the [Display system menu] switch.
2 cm
2 c
m
2 cm
2 c
m
2 cm
2 cm
2 cm
2 cm
Recognition area Recognition area
Press the upper left corner
for at least 2 seconds.
Status bar
Press a different corner for at least 2 seconds.