Fuji Electric MONITOUCH X1 Series, Hardware Specifications

Page: 114 / 180

5.4 Local Mode
5-55
1
2
3
4
5
6
7
8
9
10
Touch switch test procedure
1. Press [I/O Check] in the menu icons and open the [Touch Switch] tab window.
2. Press the [Test] switch. Grids appear on the screen as shown below.
3. Checking the switch output state:
Press a position on the screen, and check if the pressed position turns white. If the pressed position turns white, the switch is
operating correctly.
Press the [Clear] switch to clear all white sections and the [Return] switch to return to the [Touch Switch] tab window.
Coordinates (0, 0)
Output
coordinates