Fuji Electric Monitouch V9 Series Troubleshooting / Maintenance Manual Download Page 31

Page: 31 / 145

3. System Menu

1-19

MONITOUCH Operations

Delete

This section explains how to delete data from the SD card inserted in the SD card slot.

1. Display the system menu

(*)

and press the [Storage Viewer] switch.

* For details on how to display the system menu, refer to page 1-6.

2. Select a file to delete and press the [Delete] switch.

3. The following confirmation dialog appears. Press the [OK] switch.

The selected file is deleted.

This completes the deletion.

Error

If a selected file is in use or the selected directory is incorrect, the following error message is
displayed.
Check the usage status of the selected file, or check if the selected directory is correct.

The file or folder selected in the left pane is deleted.
Note that the file or folder selected in the right pane will not be deleted.

The file or folder selected
in the right pane will not
be deleted.

Example: When copying a file, the copy destination directory was incorrect.

Summary of Contents for Monitouch V9 Series


















































































































































Search results

Summary of Contents for Monitouch V9 Series

Reviews:

Related manuals for Monitouch V9 Series

Brands by name

Popular brands

Fuji Electric Monitouch V9 Series, Troubleshooting / Maintenance Manual

Search results

Summary of Contents for Monitouch V9 Series

Reviews:

Related manuals for Monitouch V9 Series

Brands by name

Popular brands