22
How to Use
Supplying Power
Confirm the wires are correctly connected.
IN-100 has no power switch. Use an external switch or a circuit protector.
GO output turns on 10 seconds after power input, and display turns on.
When GO output is turned off, start using the Product.
Key Locking
To lock the keys, open load measurement values screen, simultaneously press RESET
and SET keys and hold them for 3 seconds. Then
KEY
of
—LOCK—
, located bottom
right, lights up.
To cancel key lock, simultaneously hold down RESET and SET keys for 3 seconds. Then
KEY
of
—LOCK—
, located bottom right, turns off.
Setting Lock
You cannot lock settings in an ordinary situation. You may either lock settings from
CC-Link or contact us.
