- 2 -
⑩
Pressure gauge
Shows the air pressure after the pressure is adjusted by the
regulator. Normally, operate the press within the range of
0.2 to 0.5 MPa.
CAUTION:
Operating the press with pressures outside
this range can lead a malfunction and possible injury.
⑪
Drain outlet
Used to drain off water that accumulates in the filter and
regulator. Dirty water may splash out when opened. Put a
cup under the drain to catch the water when you open it.
⑫
Two-handed pushbutton switches
Both switches must be pressed at the same time to start
the press ram.
WARNING
: Make sure to use the both hands for this
operation, in order to avoid injury.
⑬
Column
The column contains an integrated air tank. This tank keeps
the press output constant, even if there is a fluctuation in
the compressed air supplied. (This tank is not installed on
the FCP-100 and FCP-200.)
