CC186-499 TWO-SIDED SYSTEM CLOCK
REV 10/06/00
FUTURE TECHNOLOGY RESOURCES, LTD.
PAGE 1
DESCRIPTION
The CC186-499 is a two-sided system clock with six, 1.8 inch high digits per side for
displaying time or elapsed time in hours, minutes, and seconds (HH:MM:SS). It receives a
10-byte time data and control message via an RS232 input signal. Up to 50 CC186-499
displays can be connected to a single RS232 port at distances of up to 2000 feet away using
a simple two-conductor cable such as Belden 8442. CC186-499 displays require local power
to illuminate the digits. The display may be turned ON/OFF at the display and never lose
time as long as the power is not disconnected. The 1.8 inch high digits are visible up to 50
feet away.
SPECIFICATIONS
Operating voltage: 12 VAC or 12 VDC, 5 VA maximum. A power jack is provided on
the side panel for connecting power. A 120/12 VAC power
module with mating connector is included.
Input Signal:
Receives a Two-Wire RS232 signal from the host device. A
phone jack is provided on the side panel for connecting the
incoming RS232 signal. A signal cable with mating plug and DB9
female connector is provided.
Enclosure:
Black, anodized aluminum enclosure with removable rubber feet
and mounting brackets for bottom, top, and side mount
applications. Dimensions: 12"W x 3.5"H x 3.5"D.
Display:
1.8 inch high, bright red LED, digits. Six digits per side to display
hours, minutes and seconds. Discrete LED colons are located
between the hours and minutes, as well as between the mintes
and seconds. Visible up to 50 feet away.
INSTALLATION
MOUNTING: The CC186-499 has rubber feet so that it sets flat on a desk or tabletop.
Mounting brackets are provided for top, bottom, and side mounting applications. See the
illustrations below:
P O W E R A N D
SIG N A L JA C K
A C C E SS
12 .0
1.
80
3 .5
3.
5
3 .5
