background image

CDA - 4/6 

  375 MHz COMPUTER  

DISTRIBUTION AMPLIFIERS

OPERATION  MANUAL

244 Bergen Boulevard, West Paterson, NJ 07424 

Tel: (973) 785-4347 · Fax: (973) 785-4207

E-Mail: [email protected]

Web: 

http://www.fsrinc.com

REGULATORY COMPLIANCE

FSR'S ELECTRONIC PRODUCTS have been tested for compliance with: FCC Class A 
and CE The Power Adapter has been tested for compliance with: UL, CSA and CE.

WARRANTY POLICY

This product is warranted against failures due to defective parts or faulty workmanship for 
a period of one year after delivery to the original owner. During this period, FSR will make 
any necessary repairs or replace the unit without charge for parts or labor. Shipping charges 
to the factory or repair station must be prepaid by the owner, return-shipping charges, via 
UPS / FedEx ground, will be paid by FSR.

This warranty applies only to the original owner and is not transferable. In addition, it does 
not apply to repairs done by other than the FSR factory or Authorized Repair Stations.

This warranty shall be cancelable by FSR at its sole discretion if the unit has been 
subjected to physical abuse or has been modifi ed in any way without written authoriza-
tion from FSR. FSR’s liability under this warranty is limited to repair or replacement of the 
defective unit.

FSR will not be responsible for incidental or consequential damages resulting from the use or 
misuse of its products. Some states do not allow the exclusion of incidental or consequential 
damages, so the above limitations may not apply to you. This warranty gives you specifi c 
legal rights, and you may also have other rights which vary from state to state.

Warranty claims should be accompanied by a copy of the original purchase invoice 
showing the purchase date (if a Warranty Registration Card was mailed in at the time of 
purchase, this is not necessary). Before returning any equipment for repair, please read the 
important information on service below.

SERVICE

Before returning any equipment for repair, please be sure that it is adequately packed and 
cushioned against damage in shipment, and that it is insured. We suggest that you save the 
original packaging and use it to ship the product for servicing. Also, please enclose a note 
giving your name, address, phone number and a description of the problem.

NOTE: all equipment being returned for repair must have a Return Authorization 

(RMA) Number. To get a RMA Number, please call the 

FSR Service Department (973-785-4347). 

Please display your RMA Number prominently on the front of all packages.

Contact Information:

244 Bergen Boulevard, 

West Paterson, NJ  07424 

Tel: (973) 785-4347 · Fax: (973) 785-4207

E-Mail: [email protected] · Web: 

http://www.fsrinc.com

LIT1029A

FSR

43870

Summary of Contents for CDA-4

Page 1: ...t of the defective unit FSR will not be responsible for incidental or consequential damages resulting from the use or misuse of its products Some states do not allow the exclusion of incidental or consequential damages so the above limitations may not apply to you This warranty gives you specific legal rights and you may also have other rights which vary from state to state Warranty claims should ...

Page 2: ...he specified wall plug in transformer Do not use any orther power source Grounding the Product This product is grounded through the grounding conductor of the power cord To avoid electrical shock plug the power cord into a properly wired receptacle before connecting to the product input or output terminals Use the Proper Power Cord Use only the power cord and connector specified for your product U...

Page 3: ...lly loaded 0 5 dB flatness to 270 MHz Computer compatible sychronizing circuitry HD 15 female connectors for the input and each output Full cable equalization control for the output channels Compatible with all computer standards UL amd CSA approved external power source wall plug in with special locking connector APPLICATIONS Boardrooms Houses of Worship Control Rooms Classrooms Staging and Renta...

Page 4: ...concerning output 2 on the application drawing Connect the power cord Note the robust locking power connec tor Adjust the cable equalization with the variable control for mini mum distortion using an appropriate test signal or full motion video Perform the final operational check TYPICALAPPLICATION NOTE USE ONLY AN HD 15 TO HD 15 CABLE ON OUTPUT 2 TO ENSURE THAT ID BITS ARE PASSED THROUGH TO THE C...

Reviews: