FSP EssenSolar CFS model User Manual
www.fsp-group.com.tw
22
Load in Watt
When load is lower than 1kW, load in W will present xxxW
like below chart.
When load is larger than 1kW (
≧
1KW), load in W will
present x.xkW like below chart.
Main CPU version checking
Main CPU version 00014.04
Operating Mode Description
Operation mode
Description
LCD display
Standby mode / Power saving
mode
Note:
*Standby mode: The inverter is not
turned on yet but at this time, the
inverter can charge battery without
AC output.
*Power saving mode: If enabled, the
output of inverter will be off when
connected load is pretty low or not
detected.
No output is supplied by the unit
but it still can charge batteries.
Charging by utility and PV energy.
Charging by utility.
Charging by PV energy.
No charging.
Fault mode
Note:
*Fault mode: Errors are caused by
inside circuit error or external reasons
such as over temperature, output
short circuited and so on.
PV energy and utility can charge
batteries.
Charging by utility and PV energy.
